Copyright
Unless expressly stated otherwise, projectsbyzac.com and contributors (“Zac”) claims copyright ownership of the content of this website (“the material”).
You may download, display, print and reproduce the materials in unaltered form (attaching a copy of this notice) for your personal, non-commercial use. Zac reserves the right to revoke such permission at any time.
Apart from this permission and uses permitted under the Copyright Act, 1968, all other rights are reserved.
Request for further authorisations, including authorisations to use the Material on this website for commercial purposes, should be directed to Zac.
Disclaimer
The material has been made available for general personal use only and is provided without any express or implied warranty as to its accuracy or currency.
All access to, and use of, the materials is at the user’s risk.
Zac accepts no responsibility for the results of any actions taken on the basis of information on this website, nor for the accuracy or completeness of the material.
Before relying on the material or any part of it you should independently verify its accuracy or completeness.
Zac expressly disclaims all and any liability and responsibility to any person in respect of the consequences of anything done or omitted to be done by such person in reliance, whether wholly or partially, upon this website or the material.
No warranties or representations are made by Zac about this website, or the material including any warranties or representations as to the accuracy of the material or its suitability for any particular purpose. We do not warrant that the material is free of infection by computer viruses or other contamination. We exclude, to the full extent permitted by law, any liability arising as a result of the use of the website or the material. Where liability cannot be excluded our liability is limited to the resupply of the material, or the reasonable cost of having the material resupplied.
Zac will not be liable for any indirect or consequential loss, including loss of profits arising out of the use of this website or the material.
Legal Advice
The material is not intended to be legal advice. Legal or other professional advice should be sought before acting or relying on the material or any part of it.
Linked Sites
This website may contain links to other websites (“linked websites”). Those links are provided for convenience only and may not remain current or be maintained.
Zac is not responsible for the content or privacy practices associated with linked websites.
Any links with linked websites should not be construed as endorsement, approval or recommendation by us of the owners or operators of those linked websites, or of any information, graphics, materials, products or services referred to or contained on these linked websites, unless and to the extent stipulated to the contrary.
Security of Information
Whilst we strive to protect data transmitted over the Internet, we do not warrant and cannot ensure the security of any information which you transmit to us. Accordingly, any information which you transmit to us is transmitted at your own risk.
Changes to Material
Zac reserves the right to alter, amend, vary or otherwise change the material at any time and without notice to you.
Variation to Terms
We may alter these terms of use at our discretion without notice to you.
Further Information
If you need any further information about our internet privacy policy or site conditions, please contact Zac directly.
Hello, I am interested in the grille clips for the duracraft color fan. Please contact me if you would consider making some for me. Thank you, Brittany (fainaigue@gmail.com)
I realize this is old. I’ll look and see if I can find the files. I can upload them so you can print them if you have access to a 3D printer, or a friend with one. I’m not sure I know where the STL files are for these anymore.
Hello zack,
Could you tell me please what the widht of the threaded bosses tha you welded on your cx 500 frame to mounting the custom tank?
I’m in the same process..
Thanks
Joaquim
Hello Joaquim, I went and measured as best I can given the bikes location and winter just now for you. It looks like it’s about 110mm from mounting surface to mounting surface for the tank rubber bushings. This is not the most precise measurment ever, Say +-1mm. But there is some wiggle room on the tank due to the rubber bushings if you need it.
Best of luck, share a pic when you are done. I should finish up some of my older project posts with finished pictures.